Press the enter key, Setting the scsi id, When "set scsi" is displayed, press the enter key – Panasonic KV-SS855D User Manual
Page 12: I setting the terminator, Setting, The scsi, Isetting the scsi
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Display Panel Instructions
2
Press the enter key.
•
After
entering
the
configuration
mode, pressing the menu key repeat
edly will change the LCD as follows.
Select the desired mode using the
menu key.
Set SCSI -* Set Counter —
Set Imprinter Set Scanner
Clear Warning Set Other Param.-
If the imprinter unit option is not in
stalled, 'Set Imprinter' will not be dis
played.
ISetting the SCSI
You can set the SCSI ID, terminator and product ID. The product ID setting depends on the personal com
puter scanner application which you are using.
Setting the SCSI ID
7
2
3
When "Set SCSI" is displayed,
press the enter key.
Use the ▼ key or A key to select
the desired setting.
• The ▲ key moves to the next ID as
shown below.
The ▼ key moves to the previous ID.
|-^0 —
—5 — 6 - ^ 7 - |
Press the enter key.
• To return the setting to the previous
one (in step 1), press the esc key.
•
After entering the SCSI ID setting
mode, pressing the menu key repeat
edly will change the display as fol
lows. Use the menu key to select the
desired setting.
SCSI ID -► Terminator Product ID -|
• The new SCSI setting will be acti
vated when the power is turned off
and turned back on.
s
c
s
1
1
D
N 0
6
s
c
s
1
1 D ?
N 0
7
12
i Setting the terminator
^ Press the menu key until "Termina-
I
tor" is displayed.
T
e
r m
i
n
a
t
0
r
?
D
i
s
a b
1 e