Panasonic PHONE KX-TC1696B - Manual (Page 44)

Before Requesting Help
Problem Remedy
“Out of range" is displayed :• You are too far from the base unit.
and an alarm tone sounds
when you press rtALKl. ' Move closer and try again.
« Place the handset on the base unit and
j try again.
• Plug in the AC adaptor.
, • Raise the base unit antenna.
The unit does not work. • Check the settings (p. 11-20).
• Charge the battery fully (p. 12).
« Clean the charge contacts and charge
again (p. 13).
• Install the battery properly (p. 42).
• Place the handset on the base unit and
unplug the AC adaptor to reset.
Plug in, then try again.
• Re-install the handset battery within
3 minutes to avoid memory loss and
place the handset on the base unit.
Then try again.
Static, sound cuts in/out,
fades. Interference from other
electrical units.
• Locate the handset and the base unit
away from other electrical appliances
(p. 3).
« Move closer to the base unit.
• Raise the base unit antenna.
• Press [CHl to select a clearer channel.
The handset does not ring. « The ringer volume is set to OFF.
Press iRINGERl while the TALK
indicator light is off (p. 19).
The handset display is blank. I • The handset is in the stand-by mode
! (p. 13). Press SEARCH (3 or 0 to
I turn the display on.
44