Listening to voice mail message(s) – Panasonic PHONE KX-TC1696B User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Listening to Voice Mail Message(s)
After receiving a voice mail message, the VOICE MAIL indicator will flash.
To listen to your voice mail, perform the following steps.
-j Press I
VOICE MAIL).
• The unit is connected to the telephone line and automatically dials
the number.
2 Follow the pre-recorded instructions.
0 When finished, press
[TALK).
• When the VOICE MAIL indicator still flashes even if you have listened to
your voice mail message(s), press and release
iPROGRAPin.
then press
and hold
IVOICE MAIL]
until the unit beeps. The indicator will turn off.
• If your voice mail service uses a voice mail tone and the recorded
message is over 3 minutes long, the VOICE MAIL indicator may not
flash.
• If your voice mail service uses a voice mail tone, the tone will be heard
from any parallel connected phone. If you use another phone to retrieve
messages, you have to dial your access number manually.
37