Selecting the line – Panasonic PHONE KX-TC1696B User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting the Line
Mode
If the line is connected to a low voltage system such as a PBX, set to “B”.
Otherwise, the Visual Call Waiting (Call Waiting ID) Service may not be
accessible (p. 41).
Your phone comes from the factory set to “A”.
The TALK indicator light must be off before programming.
1
2
3
To select “B”, press
search
OR
To select “A", press SEARCH (3-
o A long beep sounds and the mode is
saved.
® The handset will return to the stand-by
mode.
Line mode
Line mode
Press IPROGRAMI.
Save AUTO# ?
o The TALK indicator flashes.
v-Next A=Yes
Press SEARCH 0 (Next key) repeatedly
until “Set line mode ?” is displayed.
Set line mode ?
v=Next A=Yes
Press SEARCH 0 (Yes key).
Line mode
v=A A=B
o To cancel during programming, press I
EXIT]
or
IPROGRAMI.
then start
from step 1.
o If 3 beeps sound and the display shows “Save error”, move closer to
the base unit and try again. If “save error” is still displayed, place the
handset on the base unit. Restart from step 1.
If a power failure occurs, the mode will return to the factory preset (“A”).
Reprogram if necessary.
15