Panasonic PHONE KX-TC1696B - Manual (Page 14)

Settings
Selecting the Dialing iVlode
You can program the dialing mode by using the handset near the base
unit. If you have touch tone service, set to ‘Tone”. If rotary or pulse service
is used, set to “Pulse”. Your phone comes from the factory set to “Tone”.
The TALK indicator light must be off before programming.
1
2
3
Press I PROGRAM I.
o The TALK indicator flashes.
Press SEARCH 0 (Next key) repeatedly
until “Set dial mode ?” is displayed.
Press SEARCH 0 (Yes key).
To select “Pulse”, press SEARCH 0.
OR
To select ‘Tone”, press SEARCH 0.
• A long beep sounds and the mode is
saved.
• The handset will return to the stand-by
mode.
Save AUTO# ?
v=Next A=Yes
Set dial mode ?
v-Next A=Yes
Dial mode
v=Tone A-Pulse
Dial mode
Pulse
Dial mode
Tone
• To cancel during programming, press I EXIT) or [PROGRAM), then start
from step 1.
o If 3 beeps sound and the display shows “Save error”, move closer to
the base unit and try again. If “Save error” is still displayed, place the
handset on the base unit. Restart from step 1.
, If a power failure occurs, the mode will return to the factory preset (Tone). |
‘ Reprogram if necessary.
;
14