Storing the area code, To erase the area code, Settings – Panasonic PHONE KX-TC1696B User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Settings
Storing the Area Code
We recommend that you program your area code first before using the
Caller ID feature {p. 26). Then incoming calls from the same area code will
be recorded in the Caller List without the area code. You do not have to
remove the area code before calling back or storing. Also, when incoming
calls from a different area code are received, “1” will be added before the
area code automatically.
The TALK indicator iight must be off before programming.
Press [PROGRAM).
• The TALK indicator flashes.
O Press SEARCH 0 (Next key) repeatedly
^ until “Area code ?” is displayed.
Press SEARCH 0 (Yes key).
• The current setting is displayed.
The factory preset is “-----
Enter your area code.
• If you enter a wrong number, press
[CLEAR], then enter the correct number.
Press [PROGRAMi (Save key).
• A long beep sounds and the code is
saved.
» The handset will return to the stand-by
mode.
Save AUTO# ?
v=Next A=Yes
Area code ?
v=Next A=Yes
Area code
Enter area code
Area code
: 123
PROGRAM=Save
Area code
:123
® To cancel during programming, press [
exit
], then start from step 1.
To erase the area code
Press I PROGRAMi SEARCH 0 (Next key) 3 times ^
SEARCH 0 (Yes key) [CLEAR] [PROGRAM] (Save key).
« If a “2nd area code” has been stored (p. 17), it wil] also be cleared
automatically.
J6