Panasonic PHONE KX-TC1696B - Manual (Page 40)

Special Features
FLASH Button
Pressing [FLASH 1 allows you to use special features of your host PBX such
as transferring an extension call.
•You can also press
[CALL WAIT
I instead of I
FLASH!.
Selecting the flash time (call waiting time)
The flash time depends on your telephone exchange or host PBX.
You can select from flash times “700, 600, 400, 300, 250, 110,100 or
90 ms (milliseconds)” by programming. Your phone comes from the factory
set to “700 ms”.
The TALK indicator light must be off before programming.
H Press IPROGR^I.
4
5
• The TALK indicator flashes.
Press SEARCH 0 (Next key) repeatedly
until “Set flash time?” is displayed.
Press SEARCH 0 (Yes key).
Press
SEARCH
0 (Next key) repeatedly
until the desired time is displayed.
Press SEARCH 0 (S ave key).
• A long beep sounds and the time is saved.
• The display will return to the stand-by
mode.
SAVE AUTO# ?
v=Next A=Yes
Set flash time?
v=Next A=Yes
Flash time
: 700ms
v=Next A=Save
Flash time
: 110ms
v=Next A=Save
Flash time
:110ms
• To cancel during programming, press [EXITl or iPROGRAMl. then start
from step .1.
• If you are connected via a PBX, a longer flash time may be necessary to
use PBX functions (transferring a call, etc.). Consult with your PBX
supplier for the correct setting.
• If 3 beeps sound and the display shows “save error”, move closer to
the base unit and try again. If “Save error” is still displayed, place the
handset on the base unit. Restart from step 1.
! If a power failure occurs, the setting will return to the factory preset
I (700 ms). Reprogram if necessary.
40