Triple watch scan, Select dual watch mode, Start scanning with dual watch mode – Panasonic KX-G2200A User Manual
Page 28: Select triple watch mode, Start scanning with triple watch, Mode, Scan operation, Dual watch scan
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Scan Operation
(cont.)
DUAL WATCH SCAN
3
INTL
lU
DUAL
(
f i m c
)
then
|CKI6|
DML
j
TRIPLE WATCH SCAN
,
----
INTL
in
*• • ►DUAL
( ™ * c )
then
^ __
quickly
-
27
-
SELECT DUAL WATCH MODE
(1) Press FUNC then CH16 (DUAL) to
monitor CHI 6 at intervals of a few
seconds.
• “DUAL” is displayed.
(2) The unit monitors CH16 and the present
channel every few seconds.
START SCANNING WITH DUAL WATCH
MODE
(1) Press SCAN (TRI) quickly.
• “SCAN” is displayed and scanning will
start.
(2) The unit will alternate between CHI 6
and each channel sequentially scanned.
(3) The scan stops then a signal is received
and then the scan resumes after the
signal disappears.
(4) When you press SCAN (TRI) and hold for
1 second, “T-SCAN” is displayed then
scanning will pause at a channel on which
a signal is received for a few seconds and
then the unit will continue scanning up.
SELECT TRIPLE WATCH MODE
(1) Press FUNC then SCAN (TRI) quickly.
• ‘>DUAL” is displayed.
(2) The unit will monitor CH16 and
programmed channel at intervals of a
few seconds.
START SCANNING WITH TRIPLE WATCH
MODE
(1) Press SCAN (TRI) quickly.
• “SCAN” is displayed and scanning will
start.
(2) The unit alternates CH16 and
programmed channel and each channel
sequentially scanned.
(3) The scan stops when a signal is received
and then the scan resumes after the
signal disappears.
(4) When you press SCAN (TRI) and hold for
1 second, “T-SCAN” is displayed then
scanning will pause at a channel on which
a signal is received for a few seconds and
then the unit will continue scanning up.