Panasonic KX-G2200A - Manual (Page 12)

LCD (Liquid Crystai Dispiay)
USA
INTL
CAN
WX
fO
HIUO T-SCAN PUP
MEMO^DUAL
USA Shows USA mode.
INTL Shows International mode.
CAN Shows Canadian mode.
WX Shows Weather mode.
Channel Display Displays the channel in use.
HI Shows the High Power (25 Watt) mode.
LO Shows the Low Power (1 Watt) mode.
SCAN Shows unit Is in Channel Scan mode.
T-SCAN Shows unit is in the TIme-Scah mode.
Scanning starts again automatically even if a signal exists.
DUP Shows that the unit is in the Duplex mode.
MEMO Shows that the unit is in the Memory mode.
Only memorized channels are shown.
M In INTL, CAN, USA and WX modes, shows that the displayed channel
has been memorized.
It is possible to set or reset the desired channel in Memory.
DUAL This function allows periodic checking for activity on CHI 6 while receiving
another channel.
TX Shows that the unit is transmitting.
0 Shows that the Function button has been pressed. For six seconds after
pressing the Function Button, the Secondary Functions of each button are
available.
—
Shows that the Channel Memory is empty, (no channels have been
memorized.)
► DUAL Shows that the Triple Watch is on.
► Shows that the displayed channel is on program of Triple Watch channel.
11 -