Set-top box connection to vcr/s-video vcr, Vcr/s-video vcr setup, Set-top box connection to vcr/s-vtdeo vcr – Panasonic TU-DST50 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
nstallation
Set-Top Box Connection to VCR/S-Video VCR
Follow this diagram when connecting the STB to a VCR or S-Video VCR.
Connect the S-Video or video
cable. See Note below.
NOTE: S-VIDEO, VIDEO AND AUDIO
CABLES NOT INCLUDED
VCR/S-VIdeo VCR
Connect the
S-Video or
video cable.
See
Note
below.
Panasonic*
DKilTAL TVDECOQEn
WARNING
\M
VCR/S-VIDEO VCR SETUP
Procedure
•
Connect video cable from the NTSC video output jack on the STB to the video input jack on
the VCR/S-Video VCR.
OR
•
Connect S-Video cable from the NTSC S-Video output jack on the STB to the S-Video input
jack on the VCR/S-Video VCR.
•
Connect audio cables from the left and right NTSC audio output jacks on the STB to the left
and right audio input jacks on the VCR/S-Video VCR.
•
Connect video cable from video output jack on the VCR/S-Video VCR to video input jack on
TV.
OR
•
Connect S-Video cable from S-Video output jack on the VCR/S-Video VCR to S-Video
input jack on TV.
•
Connect audio cables from the left and right audio output jacks on the VCR/S-Video VCR to
the left and right audio input jacks on the TV.
Note:
Connect either your S- Video or video input/output.
•
S-Video will provide better picture quality.
•
If both S-Video and video are connected, S-Video will override video.
Wi