Procedure – Panasonic TU-DST50 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
G
etting
S
tarted
Step 3d. Digital TV/Cable Reception with Conventional TV
Follow this diagram if you have a conventional TV, cable service and you want to
receive digital channels through the STB and cable channels through the cable box
(or through the TV if you have no cable box).
Optional Cable Box
NOTE:
ANTENNA, CABLE BOX, RF
CABLE, S-VIDEO, VIDEO AND AUDIO
CABLES NOT INCLUDED
DIGITAL TV/CABLE RECEPTION WITH CONVENTIONAL TV SETUP
Procedure
•
Connect the antenna cable to the STB ANT (antenna) jack.
•
If using a cable box, connect the cable wire from the wall jack to the cable box ANT
(antenna) IN jack using a standard RF cable with coaxial connector. Connect the cable box
ANT (antenna) OUT jack to the TV ANT (antenna) IN jack using a RF cable.
•
If not using a cable box, connect the cable wire from the wall jack to the TV ANT (antenna)
IN jack using a RF cable (not shown).
•
Follow directions in Getting Started section to connect the STB to a conventional TV.
~m\