Step 6a. action / navigation button, Remote action / navigation button, Step 7. antenna/cable mode – Panasonic TU-DST50 User Manual

Page 29

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

etting

tarted

Step 6a. ACTION / Navigation Button

Press the ACTION button to select main menu items. Press the A or ^ arrows to

highlight sub menus. Press the ^ arrow to select features. Press the A or V arrows

to scroll through options within a feature. Press the ^ arrow to return to main menu

items.

Remote ACTION / Navigation Button

Note:

Be careful to press ACTION in the middle of the button. If you do not press in the
middle of the button, the arrow buttons may be activated.

Step 7. Antenna/Cable Mode

Select either Antenna or Cable mode, depending on the type of incoming signal you

are using. Cable must be 8VSB format.

Procedure

□

In SET UP Menu, select INPUT to choose either ANTENNA or Cable.

n Press the ^ arrow, then the ^ and V arrows to select ANTENNA, Cable STD, Cable HRC

or Cable IRC.

•

ANTENNA-VHF/UHF

•

Cable STD - Standard Cable TV Signals

•

Cable HRC - Harmonic Related Carrier

•

Cable IRC - Incremental Related Carrier

Note:

Contact your local cable provider if you are not sure which setting to use.

□

Press the

ACTION

button to make your selection.

□

Press the ^ arrow to exit back to Roller Guide.

Note:

Whenever the antenna or cable mode is changed. Timer 1 and Timer 2 will revert back

to default settings.