Tape operation, Press search, Press ff or rew – Panasonic PV C2032W User Manual
Page 24: Press ff to, Example 2, Upon locating end point, Tape operation -26, I 2 1 5 6 tt, Search system is, Index search
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Tape Operation
Search System is ...
Each time a recording is made, an invisible index mark is placed on the tape.
When timer recordings are made, program index and information are also included.
These index marks can be used to access or scan recordings.
Index Search
Go directly to the desired recording.
1
INDEX SEARCH
EMTEH INDEX NUMBER:!
USING 1-9 KEYS
FORWARD SEARCHiFF
REVERSE SEARCH:REW
NEXT: SEARCH
EXIT:STOP
Press SEARCH*
in Playback or
Stop mode to
display INDEX
SEARCH screen,
and then press
NUMBER Keys to
select the
recording number.
• To calculate number,
see below.
Press FF or REW
to start search.
INDEX SEARCH
FORWARD SEARCH:FF
REVERSE SEAHCHlREW
Play begins at
search end. To
search fonward or
back 1 index,
press FF or REW
while screen left in
displayed {10 sec.).
■ To calculate the Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
Program End Search
Locates end point of recording for continuity.
1
Press SEARCH twice in Playback
or Stop mode to display
PROGRAM END SEARCH screen
PROGRAM END SEARCH
SEARCH
START:FF
EXIT; SEARCH
Press FF to
start search.
Example of Program End Search operation.
Fia.1
PUYBACKDIRECTION -----►
Program 1
Program 2 or BLANK
Press SEARCH button
FF
End Point!
1
Program 1
1|
fBLANK
i
¡|Program 2
j|j
BLANK
Press SEARCH button
FF
\EndPolntl
Fig.3 If search exceeds a few seconds in BLANK area
Press SEARCH button
1 1 BLANK
IPII PT08ram2 |
\
ff
rn
lEnd Point f
Example 2:
To go to rec.
6 from rec. 2, enter 4 and press FF.
□I 2
1 5 6 TT
NOTE: i indicates start points of each recording.
Upon locating end point...
The unit searches slightly past end point,
reverse searches, and plays the last few
seconds of the program, then stops.
II
f Piogram 1 (BLANK) |
|j
Program 2 (BLANK) |
1
Press SEARCH button
SEARCH
PP
A
PLAY;_^
J SEARCH
• Make each entry within 10 seconds, or the Index
Search mode will be canceled.
• If Index Search is started very close to an index
mark, that index mark may not be counted in the
search.
• If Program End Search is started very
close to an index mark, that mark may be
skipped over,
• To cancel, press PLAY or STOP.
24
For assistance, please call: 1'80C^211-PANA(7262) or send emiatl to : corisiinien
3
roducts@panasoniccaTi