Copy your tapes (dubbing), Connections you’ll need to make, Playback (source) – Panasonic PV C2032W User Manual
Page 13: Recording (editing) unit, Select “line” mode, Selecting input mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Copy Your Tapes (Dubbing)
Connections you’ll need to make.
Playing (Source) VCR
AUDIO VIDEO
OUTO-i
IN
O
(g) IN FROM ANT.
® OUT TO TV
Recording (Editing) unit
Playback (Source)
1
Recording (Editing) unit
Insert pre
recorded tape.
I
1—1
f
1
1
Lai
__ ^___
U
Insert blank tape with
record tab.
• Dubbing tapes protected
with Copy Guard will have
poor quality results.
Select “LINE” mode.
See “Selecting Input Mode” below.
PAUSE
1 ►
SLOW
m
Press PLAY then
PAUSE at starting
point to put in
Standby mode.
REC
PAUSE
o
CD
SLOW
Press REC, then
PAUSE/SLOW
immediately to put in
Standby mode.
(Perform operation of steps 4 and 5 on both units at same time.)
Press PLAY
to start dubbing.
Press PAUSE/SLOW
to start dubbing.
Press STOP
to stop dubbing.
Press STOP
to stop dubbing.
Selecting Input Mode
Method 1:
Press CH
AT.
The display will change as follows.
rtSiUlUiliV----------------------------------------
• Unauthorized exchanging
and/or copying of copyrighted
recordings may be copyright
infringement.
C
^LINE-
(CABLE) (TV)
—►125 or 69
D
Method 2:
a Press ACTION for MAIN MENU,
b Press AT^ ► to select “TV", then press
ACTION for SET UP TV screen,
c Press
AT
to select “INPUT SELECT,” and
then press ► to select TUNER" or “LINE."
d Press ACTION twice to exit this mode.
13