Connection of camera, Wiring of cables – Panasonic WV-7140 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CONNECTION OF CAMERA

1. Connect the camera power cable [Provided) to the camera and the Connection Board.

Cut off the cable clamp of the co-axial Cables.

Then connect the BNC cable which is marked (V) to the output of the camera. And if it is necessary, also connect the BNC

cable which is marked (S) to the GEN LOCK of the camera for external sync.

Caution:

Be sure to connect the power cable with the right position of the AC terminal strip on the camera.

Green - GND
Red -1

Black - 2

3. Clamp BNC connectors again not to touch the metal part to the electrical components.

WIRING OF CABLES

- 5 -