Panasonic KV-SS010 - Manual (Page 9)

Installing the Imprinter Unit
3 Insert the connector of the
imprinter unit into the scanner
connector.
• Be sure to completely insert the
connector.
• Rotate the clamp in the direction of
arrow so that the clamp does not
push the imprinter door.
• When attaching the connector, hold
the imprinter unit as shown below.
4 insert the scanner
the imprinter unit
Match and
pins with
grooves.
• Be sure to completely insert the
scanner pins in the imprinter unit
grooves as shown in the diagram to
the right.
If it is not, printing can not be done
correctly.
• When installing the imprinter unit,
hold it as shown below.
5 Close the imprinter door.