Installing the ink cartridge – Panasonic KV-SS010 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing the Ink Cartridge
iFor the KV-S2055 series pre-imprinter.
1
Press the protective sheet of the
ink bag using the included pin
until
the
ink
accumulates
as
shown in the diagram to the
right.
• Be sure that the pin presses the
protective sheet on the ink bag, not
the ink bag itself. Otherwise, the pin
may puncture the ink bag.
2
Remove
any
tissue paper.
excess ink with
3
4
Move the print positioning knob
to the right side, lift up the
imprinter unit (®) and tilt it at
an angle ((D).
Insert the ink cartridge's top side
into the carriage. (®)
Press the bottom side of the ink
cartridge into the carriage
((D)
and then lock the ink cartridge
adjusting lever.
((D)
•Follow the sequence of 0 through CD
in the diagram to the right.
Top side
Bottom side
Ink
cartridge
adjusting lever
Carriage
10