Panasonic KV-SS010 - Manual (Page 6)

Installing the Imprinter Unit
4
6
insert the scanner
the imprinter unit
Match and
pins with
grooves.
• Be sure to completely insert the
scanner pins in the imprinter unit
grooves as shown in the diagram to
the right.
If it is not, printing can not be done
correctly.
• When installing the imprinter unit,
hold it as shown below.
5 Disengage the scanner connector
from the clamp and insert it into
the connector of the imprinter
unit as shown in the diagram to
the right.
• Be sure to completely insert the
connector.
7
Insert the scanner connector's
cables into the clamp, and deal
with the scanner connector by
pressing it against the side of the
scanner as shown in the diagram
to the right.
Close the pre-imprinter door.
The KV-S2055 series post-imprinter installation
1 Turn off the scanner's (KV-
S2055 series) power and unplug
the power cord.
•Refer to stepi, "The KV-S2055 series
pre-imprinter installation", on page 5.