Panasonic SC-CH11 - Manual (Page 42)

Setting timer recording
Have you read and completed “Setting the Time
of Day” on page 15? If not, please complete these
sections before continuing.
The following example shows how to set the timer recording func­
tion for recording a broadcast from the tuner.
Switch on the power.
1 Follow steps 1 through 11 on page 46 for
setting the timer. In step 2, select R-TIMER
instead of P-TIMER.
2 Press the TUNER Input select button and tune
in the station whose broadcast you want to
record. Then insert a cassette into deck 2.
3 Press REC TIMER.
The system is switched to the standby mode.
The timer recording indicator will appear on the display.
Timer recording will start at the preset time.
To listen to the system after you have set the timer but before
timer recording has taken place:
Press the power switch to on and select the desired source. After
you have finished listening, return the system to the timer setting
mode. (This switches the power to standby mode.) If you are
listening to a tape, using deck 1 is recommended.
Notes:
•After the timer recording is completed, the setting still remains in
the system’s memory. So after recording, it is recommended to
cancel this mode by pressing REC TIMER to prevent the unex­
pected recording.
• If the power is on, the timer will not function. The system must be
in the standby mode.
•While the timer recording is operating, the volume level is auto­
matically — dB. If you wish to monitor the sound, adjust the
volume level with the volume levei control.
• It is not possible to set timer recording and timer play simulta­
neously. (For example, it is not possible to timer record a program
in the middle of night, and then wake up by timer play the next
morning.)
TIMER NEC
I c
1 C-U life
illuminate
49