Panasonic OMNIVISION PV-M2737 - Manual (Page 29)

Remote Control Correction
Combination VCR cannot be remote • Aim the Remote Control directly at the remote sensor on the
controlled... Combination VCR. (P. 7)
• Avoid all obstacles which may interfere with the signal path.
• Inspect the remote batteries for possible replacement. (P. 4)
• Make sure that VCR LOCK is set to off. (P. 23)
• Exposing the Combination VCR remote sensor to direct
fluorescent or outdoor light may cause signal interference.
Miscellaneous Correction
Video cassette cannot be inserted... • Insert cassette with window side up and the record tab
facing you.
Video cassette cannot be removed... • Check that the power plug is completely plugged into an AC
outlet.
Eject does not function or insertion cannot be • Turn the POWER off and then on, and try ejecting or
done... inserting the tape again.
Video cassette ejects when a recording is
started, or the power is turned off for timer
recording...
• Make sure the record tab is intact on the cassette. (R 27)
In stop mode, the VCR motor (CYLINDER) • To enable the quick play mechanism, the VCR cylinder will
continues to rotate... rotate for about 5 minutes. This reduces response time from
Stop to Play mode from Play to Rewind Search mode.
VCR cannot be controlled... • Make sure that VCR LOCK is set to off. {P. 23)
If you cannot resolve your problem, please call the Customer Satisfaction Center for
product assistance at 201-348-9090.
To locate an authorized servicenter call toll free 1-800-545-2672.
29