Panasonic OMNIVISION PV-M2737 - Manual (Page 20)

Timer Recording
Your Combination VCR can be set up to
do a recording while you are away or
othenwise occupied. Up to 8 programs
can be placed in memory. You can
choose to record one time, daily, or
weekly.
kX Check list before you begin.
□ ah connections are made (see page 5).
□ Your Combination VCR is piugged in.
□ The clock is set.
□ The tape is long enough.
□ The record tab is in place.
Push PROG to display
the “SET PROGRAM”
screen.
Push A V to select
“TIMER program ;
and then push Oto
display the program
screen.
•If a program is already in
memory, push* T
repeatedly, and then |>to
select an unused program number.
--- SET PROGRAM --
VCR PIUS+ PROGRAM
TIMER PROGRAM
SELECT : * ▼ KEY
SET :► KEY
END :PROG KEY
START STOP CH
SLP
SELECT START DATE
SELECT :A T KEY
SET > KEY
END :PROQ KEY
Push A W a n 6 |>to select and
set one of the following:
1-31 = One time recording
DAILY = Same time MON ~ FRI
WEEKLY = Same time once a week
Example ■ 3 1 — 1 — 2 '
Today’s
Date
.7 SELECTA/T Selection Order DAILY
[^WEEKLY......... WEEKLY WEEKLY _J
PROGRAM TIMER Indicator
(SAT) (MON) (SUN)
Push A Vand <| [>to
select and set each of
the remaining items at
right.
Remaining Items;
• START time
• STOP time
• CH(annel) number,
or LINE for outside
source recording
• Speed (SP, LP, SLP)
(
2
)
To Make Corrections
Repeatedly p u s h t o move the cursor to the right, or<]to move to
the left to the incorrect entry and make the correction.
Push PROG to end the
program.
• This screen appears for
confirmation.
P DT START STOP CH SPD
2 ------ : —
3 ------------
4 ------
To Enter More Programs
Push A V and E^to select and set a blank
program number, and then repeat steps 3 and 4.
CANCEL:ADD/DLT KEY
SELECT 1-8:A ▼ KEY
ETTTER :► KEY
END :PROG KEY
Push PROG twice to return to the normal
screen.
• The PROGRAM TIMER indicator lights on the
front panel.
• If you’re using a cable box, make sure that it is
tuned to the desired channel and the power is left
on for timer recording.
Two minutes before the Timer Recording starts, “TIMER REC WILL
START SOON” will appear on-screen.
20