Panasonic OMNIVISION PV-M2737 - Manual (Page 28)

Before Requesting Service
Check the following points once again if you are having trouble with your Combination VCR.
Power Correction
No power... • Completely insert the Power Plug into an AC wall outlet.
• Set the POWER button to ON.
Monitor Correction
No picture or sound... • Make sure your antenna or cable system is connected to the
Combination VCR. (P. 5)
• Check that the power plug is completely plugged into an AC
'
outlet.
• Check that the POWER button is set to on.
Poor picture with normal sound... • Adjust the BRIGHT, SHARPNESS, and PICTURE controls in
the SET UP TV menu. (P.12)
Poor sound with normal picture... • Adjust the VOLUME control. (P. 11)
Poor TV reception... • Adjust the SHARPNESS and PICTURE controls in the SET
UP TV menu. (P. 12)
No color or poor color... • Adjust the TINT and COLOR controls in the SET UP TV
menu. (P. 12)
Ghost (multiple) images... • Install a directional antenna.
TV programs cannot be watched... • Make sure that the channel being received is in the
Combination VCR’s memory. (P. 8)
VCR Correction
TV program cannot be recorded... • Make sure your antenna or cable system is connected to the
Combination VCR. (P. 5)
• Make sure that the record tab is intact on the cassette.
(P. 27)
Stereo or SAP broadcasts cannot be
recorded...
• This unit is not designed for stereo/SAP broadcast recording.
Timer recording cannot be performed... • Set the recording Start/Stop time correctly. (R 20-21)
• Timer recording may not be performed or continued if a
power interruption of more than 1 minute occurs before or
during a Timer Recording, even if power resumes thereafter.
No playback picture, or the playback picture is
noisy or contains streaks... • Adjust the TRACKING control in either direction. (P. 16)
VCR cannot be controlled... • Make sure that VCR LOCK is set to off. (P. 23)
28