Panasonic WV-BP310 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

The maximum extensible coaxial cable length

between the camera and the monitor is shown

in the table 1. Since cable quality varies

among

manufactures,

please

verify

video

quality

before

final

installation,

maximum

lengths are to be used.

Table 1

cable and cause poor picture quality.

Gen-Lock Video Cable

Connect the coaxial cable for gen-lock video signal

between the Gen-lock Video Input Connector (14) and

the refference composite video output (B/W or color

1.0 Vp-p/75 ohms) or composite sync (4 Vp-p/75

ohms) or black burst (0.3 Vp-p/75 ohms) of the produc
tion system.

Coax. Cable

GENLOCK

Composite
Video Signal

GENLOCK

Video Distribution
Amplifier

GENLOCK

The Gen-lock termination Switch of all cameras

should be set to 75 ohm position.

-8-