Panasonic DVD-CV52 - Manual (Page 8)

Basic play
&
w
O Q
SUBTITLE
DISC
SEQUENTIAL-
FL SELECT
POSITION
MEMORY
® @
QUICK
REPLAY
DISC1 - DISCS
Numbered
buttons
1
Drawer m DISC SKIP
7
CD SEQUENTIAL
button/indicator
Preparation
Turn on the television and select the appropriate video input on the
television to suit the connections for the player.
Press [c!)] to turn on the unit.
Press [^] to open the drawer.
Place the disc(s) on the disc tray(s).
You can load discs on the other trays by
pressing [DISC SKIP] on the main unit.
•The label of the disc must face up\ward. (With double-sided discs,
load so the label for the side you want to play is facing up.)
Press [^] to close the drawer.
The disc indicator will go out when the unit reads a tray as empty.
>lf a menu screen is shown,
see right.
display
Disc No. in the
play position
Disc indicator
O Press [► ] (PLAY).
Play starts from the disc in the front-left position.
{MP3 discs}
Group and track names are displayed on the television.
Press [SUBTITLE] to turn the display on or off.
When the disc finishes playing
If the sequential mode page 9) is off, select the disc using the disc
type information screen (^ right).
To stop play
Press [■] {■► right, Resume function).
To pause play
Press [II] during play,
oj Press [►] (PLAY) to restart play.
S To prevent damage
B Do not; »load more than one disc per tray.
•touch the drawer or the carousel while they are in motion.
■ •rotate the carousel by hand.
•close the drawer by hand.
•If “C5” appears on the television
The operation is prohibited by the unit or disc.
•The disc continues to rotate while the menu Is displayed even after you
finish playing an item, Press [■] when you finish to preserve the unit’s
motDr and your television screen.
• Volume may be lower when playing DVDs than when playing other discs
or during television broadcasts.
If yc u turn the volume up on the television or amplifier, be sure to reduce
the volume again before playing other sources so that a sudden increase
in output does not occur.
Disc type information screen
You can check the kinds of discs loaded on the trays, and start playing the
prefefred disc.
Remote control only
Press [DISC],
jDisc type information screen appears.
(s2 <33 ^
■wa BiiiM iMiBi B
—; The unit has not determined the kind of the disc,
NoDisc: There is no disc on the tray.
Press the disc button ([DISC1] - [DISCS]).
The disc on the selected tray starts playing.
lar the disc type information screen
[DISC].
To cle
Presi
The cjther numbered buttons {[6] - [9],
type information screen is displayed. [^10]) do not work while the disc
When a menu screen appears on the television
fv^
Remote control only
Pre^s the numbered buttons to select an item.
To select a 2-digit number
Example: To select item 23, press [^10] ^ [2] ^ [3].
•When playing DVDs, you can also use [ A , ▼, ◄, ►] to select items.
Prep [ENTER] to confirm your selection.
Play pt the selected item now begins.
Other buttons used to operate menus
Read! the disc’s instructions for further details about operation.
[►►Il: Shows the next menu.
[h^l: Shows the previous menu.
[RETURN]: Shows the menu screen.
I vcd ] ____
[TOP MENU): Shows the first menu screen.
[MENU]: Shows the menu screen. IsHsH
Resume function
liVJ*
(Wh4
liVJgyj I
n the elapsed play time is displayed)
The
flash! Dosition you stopped play at is recorded by the unit when "l>”
ng on the display.
I I -I I M • I
L( -L( )„( ■ [
While “l>” is flashing, press [►] (PLAY) to start play from where you
stopped it. (When playing DVD page 9, Chapter Review)
•The position is cleared when the disc is changed or the unit is switched to
standby.
• Press [■] to clear the position.
(Continued on next page)