Panasonic RS-TR252 - Manual (Page 8)

Both sides of the tape in Deck 1 wiil be piayed, foilowed by both
sides of the tape in Deck 2. (Repeated up to eight times.)
Note that for series playback it is not possible to select different
types of Dolby NR for Deck 1 and Deck 2. It is recommended that
you use two tapes which were recorded using the same type of
Dolby NR (or both recorded without Dolby NR).
E
7
EJECT
Л
W
Press EJECT on both decks,
and then Insert the cassette
tapes.
DOLBYNR Press either DOLBY NR B or
O O C to select the appropriate
noise-reduction system.
REVERSE MODE pfeSS
OO -
iTi
О о
V,
17
PUW
►
Press ► PLAY on Deck 1.
(Series playback will begin from the
forward side of the tape in Deck 1.)
To temporarily stop playback
(Deck 2 only)
PAUSE
Press
II
PAUSE.
II I
To resume playback, press the play button cor­
responding to the side of the tape being ptayed.
To stop playback
Press ■ STOP for the deck which Is
playing.
The tape counter indicates the amount of tape travel as a
numerical value based on the number of revolutions of the tape
hub.
¡Deck 2j
Tape counter
COUNTER RESET
о
To reset the tape counter
Press COUNTER RESET.
The tape counter indication wiil return to “000".
For your reference:
When the tape Is travelling in the reverse direction, the value
displayed on the tape counter will count down.
After “000” is reached, the display will switch to "999" and will
then continue counting down.
For your reference:
It is also possible to begin series playback from the reverse side
of the tape in Deck 1 or from Deck 2. (Refer to the tape travel
table on page 7.)
8,