Panasonic RS-TR252 - Manual (Page 7)

Reverse function
The reverse function on this unit has three modes (¡ZZZ, <~T'i, CO
). Read the descriptions below and select the mode as
desired, (Refer to step 4 on page 6.)
Mode
CO
OO
Tape travel
Only one side of the tape (either the forward side
or the reverse side) will be played, and operation
wilt automatically stop when playback has been
completed.
Both sides of the tape will be played repeatedly
eight times, and then operation will automatically
stop.
(If playback is begun from the reverse side, the for­
ward side will be played seven times.)
When there is a tape In only one of the decks
Both sides of the tape will be played once, and
then operation will automatically stop.
(If playback is begun from the reverse side, the for­
ward side will not be played.)
When there is a tape In each of the decks
The forward and reverse sides of the tape in Deck
1 will be played, followed by the forward and
reverse sides of the tape in Deck 2, and after this
operation is repeated eight times, operation will
automatically stop.
(If playback is begun from Deck 2, the tape in
Deck 1 will be played seven times.)
About the automatic-tape-select
function
This unit is equipped with the automatic-tape-select feature: it
automatically detects the type of tape being used, and then
makes the suitable adjustments of the bias and equalization ac­
cordingly.
About the Dolby noise-reduction
system_________________________
The Dolby noise-reduction system is designed to effectively
reduce the annoying high-frequency "hissing" noise typical of
cassette tapes. During recording, the system functions to In­
crease the high-frequency sound level, the sound, and then, dur­
ing playback, that same portion Is weakened to bring it back to
the previous level.
This unit includes two types of Dolby noise-reduction systems,
the Dolby B NR-type and C NR-type.
Dolby B-type nolse-reductlon
Noise is reduced to about one-third.
Use this system when playing back tapes recorded by the Doiby-
B noise-reduction system, such as prerecorded music tapes, etc.
Dolby C-type noise-reduction
Noise is reduced to about one-tenth.
Use this system for the recording and playback of sound sources
that have a wide dynamic range and good tone quality, such as
FM broadcasts of live performances, etc., and for playing back
such tapes.
About the Dolby HX-Pro headroom
extension system
By functioning to improve the maximum output level of the tape’s
high-frequency range, this system permits recordings without a
reduction in the level of the sound source's high-frequency
range. In addition, by using the system in parallel with this unit’s
noise-reduction system, recording and playback with a greatly ex­
tended dynamic range is possible.
About the remote control function
This cassette deck can be operated by using the remote control
provided with a Technics amplifier, (For detailed information,
refer to the operating instructions of the amplifier.)
During operation from the remote control, the “R.C." indicator
will light up.
1 n n n
«-20 “15 “10 -6 -3 0
R
□a +s +B
U U U -
R.C.1 |> =r > R.C.2
Deck 1 ‘‘R.C,’’
indication Deck 2 "R.C.
indication
Dolby noise reduction and HX Pro headroom extension
manufactured under license from Dolby Laboratories Licens­
ing Corporation. HX Pro originated by Bang & Olufsen.
"DOLBY”, the double-D symbol [U and "HX PRO" are
trademarks of Dolby Laboratories Licensing Corporation.