Sending documents, Set document(s) face down, Make sure that the memory lamp is on – Panasonic Panafax UF-744 User Manual
Page 49: If not, press 1 mem6ry~i to set "on, Enter a telephone number from the keypad, Ex:(llli](s][iiel(i](4i, Manual number dialling (memory transmission)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
УУЗООС0О2
Sending Documents
303010002 Manual Number Dialling (Memory Transmission)
303050001 To dial the telephone number manually using the keypad, follow the steps below.
303060001
1
Set document(s) face down.
DOCOMENT SET
enter
station
(S) 00%
yxi<}f:^02
303060003
2
3
MEMORY
Make sure that the MEMORY lamp is on.
If not, press 1 MEM6RY~I to set "On”.
Enter a telephone number from the keypad.
Ex:(lllI](S][IIEl(I](4i
TEL.NO.
55512341
303060004
f-
303070007
юзотооов
4
ФSTART
ts
The document is stored into memory with a file number.
Then starts to dial the telephone number.
* STORE *
N0.002
PAGES-OI 05%
*
STORE
*
COMPLETED
TOTAL PAGES-05 25%
*
DIALLING
*
55512341
Note: i, ¡f you need a special access number to get an outside Sne, dial ft first then press (PAUSE I to enter a
pause (represented by a
before dialling the full number.
Ex: 9 PAUSe 5551234
2. If you are using Pulse dialling and you wish to change to Tone diallmg in the middle of dialling, press
1 ТОГМЁ 1 (represented by a 77*
The dialling mode will be.changed from Pulse to Tone after dialling the digit *Л
Ex: 9 PAUSE TONE 5551234
3.
To stop the transmission, press ( STOP I.
The display shows;
COMMUNICATION
STOP?
1:YES 2:NO
03070009
Press OK to stop the transmission. The document you stored will be erased automatically.
If you do not want to erase the documents, change the setting of Fax Parameter No, 31 (INC. FILE SAVE)
to Valid in advance.(see page 36)
45