Panasonic Panafax UF-744 - Manual (Page 136)

'“fTroubleshooting
1080016
1080042
1080043
1080044
1080045
1080046
1080047
f
080049
080050
paoosi
080052
080053
080054
O' >f
V- ,
080056
380057
380058
380059
380074
180062
Info.
Code
Meaning Action Page
416/417
418/419 Received data has too many errors. Check with the other party. -
420 Machine goes to receiving mode, but receives no
command from the transmitting side.
1. Remote side misdial.
2. Check with the other party.
—
422/427 Interface is incompatible. Check with the other party. -
430/434 Communication error occurred while receiving. Check with the other party.
436/490 Received data has too many errors. • Check vwth the other party. -
456 « Unit received a confidential document or was
requested to be polled of a confidential document
under any of following conditions.
1) Memory does not have enough space to
receive the confidential document
2) Confidential Mailbox file is full (10 files).
3) While printing received document
« Unit was requested to relay a document
1. Printout Rle List then check the contents.
2. Wait a moment until finishing the printing.
76
492/493
494
Communication error occurred while receiving. Check with the other party. -
495 Telephone line disconnected. Check with the other party. -
540/541
542
543/544
Communication error occurred while transmitting. 1. Reload the document and send again.
2. Check with the other party.
550 Telephone line disconnected. Check with the other party. -
552/553
554/555 Communication error occurred while receiving. Check with the other party. —
623 No document was on the ADR Reload the document and send again. -
630 Redial was not successful due to a busy line or no
response from the called station. Reload the document and send again.
631 During dialling, STOP was pressed. Reload the document and send again.
634 Redial was not successful due to a busy line or no
response from the called station. Reload the document and send again.
638 Power failure occurred during the communication. Check the power cord and plug. 20
870 Memory overflow occurred while storing
documents into memory for transmission.
Transmit documents without storing into memory.
Order addittonal memory option. 50
879 Memory overflow occurred while receiving
documents into memory.
Receiving documents with data that is greater than
the memory size.
1. Check recording paper and toner cartridge.
2. Install Optional Memory Card.
16
18
975 DRAM parity error. The document information in
memory is lost. 1. Unit will print out a Power Failure Report.
2. Resend the lost document.
127
i
V i.f.
‘-a
<3-
132