Panasonic Panafax UF-744 - Manual (Page 36)

Customizing Your Machine
Your facsimile machine has a variet/ of adjustabte Fax Parameters. These parameters, listed in the Parameter
Table, are preset for you and do not need to be changed. If you do want to make a change, read the table
carefully. Some parameters, such as the Resolution. Original, and Verification Stamp parameters, can be
temporanly changed by simple key operations just before a transmission is made. When the transmission ends,
however, these parameters return to their preset values (Home position). Other parameters can only be changed
302030001 by the procedure described below.
302020001 Setting the Fax Parameters
307060001
1 tí
FUNCTION
SET MODE (1-6)
ENTER NO. OR A V
302(?i^1
SET FAX PARAMETER (01-64)
NO.-I
302060002
30^060003
3
4
Enter Fax Parameter number from the Parameter Table
(see pages 35 to 37).
Ex: OH] for ORIGINAL
SET
FAX PARAMETER (01-64)
NO.«01
]
01 ORIGINAL
1:NORMAL
302f^-"'^
5 Enter the new setting value.
Ex: [2] for UGHT
6 SET
To set another parameter, press I CLEAR I to return to
step 3, or, to return to standby, press PSTOP I.
01 ORIGINAL
2:LIGHT
02 RESOLUTION
liSTANDARD
X)2060005
>02070001
)02070002
)02070003
ffl Note: /, To scrol! the Fax Parameters in Step 2 or 4, press 0 orE.
2. 7b pant out a Fax Parameter List, see page 126.
3. The built-in battery when fully charged can back up the Fax Parameter settmgs for up U) 10 days
when a power failure occurs.
34