Г□ □ п, Programming the home theater remote, Forct-32s2i) – Panasonic CT-3268S User Manual

Page 30: Code known, Code unknown, Infrared remote codes for specific components

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Programming the Home Theater Remote

(forCT-32S2i)

The remote control can be set to control other manufacturers components, by utilizing the

MODE SELECTION

BUTTONS

for

CABLE, DSS, VCR, RCVR

Receiver

Amplifier), CD, LD,

and

AUX

{for

Cassette Players, Second

VCR

or a

DVD.)

Code Known

Use the following procedure for setting up the
remote control using the numerical buttons

when the component’s remote code is known.

m Determine the brand of the component.

[2l Identify the code(s) associated with the

brand from the infrared code index (see
following pages). Record all possible
codes.

Confirm that the component is plugged

in and operating properly, then turn it
OFF.

[4Ì Press and hold the button, then

the

button so that both are

pressed at the same time for at least]

[S^second^ All Mode buttons will

hash.

Then let go of the buttons.

Press the appropriate Mode button

for the component. The pressed

button will illuminate steadily. All
other buttons will go out.

Enter the 3-digit code, by using the
Remote

Control

Keypad

“0”

through ”9” buttons. If a proper

code was entered, the Mode button
will blink twice then go out.

Now the rimóte Is sit for the ]

_______J

(entered code.

[7l Press the button to test the remote. If

the correct code is setup for the

component (in step |KI), the component
will turn on.

NOTE: Some brands have multiple codes.

Repeat the procedure using another

listed

code

until

the

component

responds correctly.

Code From

Index Sheet

Code Unknown

Use the following procedure for setting up the

remote control when the component’s remote

access code is not known. This procedure

uses the ’’sequence method”.

Confirm that thecomponent is plugged
in and operating properly, then turn it
OFF.

I Press and hold the

button,

then the button so that both

are pressed at the same time for at

leastns seconds. All Mode buttons
will flash.

Then let go of the buttons.

Press the appropriate Mode button

for the device. The pressed button
will illuminate steadily. All other

buttons will go out.

4 ^

EUR511060

Ql Press the button to step

over to the next code.

Press the button to test the
remote. If the correct code is

sent, the component will turn on.

Once the correct code is found,

press the

button

to store the code.

Repeat from step [H] above until the

proper component code is found. It

may take several attempts before

the correct code is found,

NOTE: If an incorrect code is entered, or

when

the

operation

not

completed within 30 seconds, the

settings will not change.

Infrared Remote Codes for Specific Components

Helpful Hint:

Write down the code numbers for your components in the space provided below. This

will serve as a handy reference whenever you need to reprogram your remote control.

CABLE

Cable TV Converter Box

□i

VCR

Video Cassette Recorder

□□

Compact Disc Player

□

DSS

Digital Satellite System

RCVR

Receiver or Amplifier

□

Laser Disc Player

П
П

other Component

Other Component

Г□

□

Other Component

Other Component |

This manual is related to the following products:

CT-32S21