Panasonic CT-3268S - Manual (Page 26)

Set-Up Features
Set Time
Clock (when set) will display on screen at initial ‘Turn On”,
after a channel change and when pressing the RECALL
button. The time must be set first in order to operate the
Program ON/OFF Timer.
NOTE: This feature will be disabled when Auto Power
On is activated.
1. Press
2. Press ^ or Wand‘s or^ to highlight the Set-Up
Icon.
3. Press to display the Set-Up Menu.
4. Press ^ or ^ to set hours (set AM/PM accordingly).
5. Press W to select minutes position.
6. Press or ^ repeatedly to set minutes.
7. Press ^3) twice to exit menus.
Antenna (Ant)
The proper Input mode must be selected for the type of
signal at the antenna input.
• TV mode is used when the Receiver is not connected to
a cable TV system, for example when using a VHF/UHF
antenna (channels 02 - 69).
• Cable mode is used when the Receiver is connected to
a Cable TV system and you are not using a cable
company converter box (channels 01 - 125).
NOTE: This feature is disabled when Game Guard
Lock is activated.
1. Press (^3.
2. Press ^or^ and^ or ^ to highlight the Set-Up
Icon.
3. Press to display the Set-Up Menu.
iSETMlR]
4. Press ^ to highlight ANT.
5. Press ^ or ^ to select TV or CABLE.
6. Press ^3 twice to exit menus.
Auto Prog
This feature allows you to place all channels with a video
signal into Channel Scan Memory. .
NOTE: This feature is disabled when Game Guard
Lock is activated.
1. Press
2. Press ^ or ^ and or ^ to highlight the Set-Up
Icon.
3. Press to display the Set-Up Menu.
iSET^URi
4. Press ^ to highlight AUTO PROG.
5. Press or ^ to start Auto Programming. Channels
will automatically advance until all channels have
been scanned.
6. Press ^3 twice after completion of Auto Programming
to exit menus.
NOTE: Channel numbers with signal present will turn
blue which indicates stored in Channel Scan
Memory.
-
26
-