0 talkback on switch, Tb (talkback) level control, Talkback microphone connector – Yamaha MC1602 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

AUX

2 SEND

(+4dB)

0 Talkback ON Switch

Pressing this switch activates the talkback microphone plugged into the talkback mic connector,

allowing voice communication from the console operator to the STEREO, AUX 1, AUX 2 or

AUX 3 busses according to the setting of the talkback assignment switches.

® TB (Talkback) Level Control

Adjusts the level of the talkback signal sent to the selected buss.

Talkback Microphone Connector

This female XLR type connector accepts just about any standard 50 ~ 600 ohm microphone

for talkback pickup. A gooseneck-type microphone that can be positioned for the most com

fortable operation is an excellent choice.

({) Talkback Assignment Switches (AUX 1/AUX 2/AUX 3/ST)

These switches allow the talkback signal to be fed to the STEREO, AUX 1, AUX 2 or AUX 3

busses. Any number of switches may be ON at the same time, so you can "talk back" to a
number of the console's busses at once.

TALKBACK

l-50dB)

jVo-

-o'V-

-o'So-

->■

ST OUT L

-► ST OUT R

AUX OUT 1

-► AUX OUT 2

AUX OUTS