Panasonic KX-TG9150E - Manual (Page 18)

^ Base Unit Settings
Base unit settings
For your reference, a chart of all items which can be customised for the base unit is shown
below.
• These items are customised using the handset.
• When customising the base unit, the current item or setting is highlighted on the display.
Base unit
settings menu Sub-menu Sub-menu 2 Default setting Page
Ringer Setup Ringer
Volume
— Medium page 30
Night Mode Start/End 23:00/06:00 page 35
On/Off Off page 35
Ring Delay 60 sec. page 35
Call Options Recall/Flash — 100 msec. page 35
Call
Restrict
— — page 36
Other Options Base Unit PIN — 0000 page 36
Repeater
Mode
— Off page 52
34 Helpline Tel. No.: U.K, 08700 100 076 R.O.I. 01289 8333
^ Base Unit Settings
Ringer setup
Ringer volume
1 IBI (centre of joystick) —> ^ Bia
2 “Ringer Setup” — na
3 “Ringer Voltnae” —> S3
4 Push the joystick up or down to select
the desired volume. —> -4* [7^©]
Night mode
Night mode allows you to select a block of
time during which the base unit will not ring
for outside calls. This feature is useful for
times when you do not want to be disturbed,
for example, while sleeping. Night mode can
be set independently for the handset (page
30) and the base unit.
Set the date and time beforehand (page 16).
Setting the start and end time for night
mode
1
2
3
4
5
(centre of joystick) —> ^ —>
“Ringer Setup”—> PHI
“Night Mode” —>
“Start/End” —>> B!3
Enter the desired hour and minute you
wish to start this feature.
6
7 133
Enter the desired hour and minute you
wish to end this feature.
Turning night mode on.'off
1 iiil (centre of joystick) —> ^ —>
E3
2 “Ringer Setup” — > Bl'ti
3 “Night Mode” —>> 5!^
4 “on/off” ra
5 “On” or “Off” —> -4- [7^®]
Setting the ring delay for night mode
This setting allows the base unit to ring
during night mode if the caller waits long
enough. After the selected amount of time
passes, the base unit will ring. If you select
“No Ringing”, the base unit will never ring
during night mode.
1 (centre of joystick) —> ^ —>
gia
2 “Ringer Setup” —>> tSS
3 “Night Mode” —>
4 “Ring Delay” —>■
5 Select the desired setting. — >■ — >■
Note:
• When the answering system answers the
call, this feature does not work.
Cali options
Changing the recall time
Change the recall time, if necessary,
depending on the requirements of your
service provider/telephone company or
PBX,
1 iml (centre of joystick) —4“ ^ —> S3
2 “Call Options” —>■ Mtl
3 “Recall/Flash” —^ l«ial
4 Select the desired setting. —)• ti!^ —>
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333 35