Panasonic KX-TG9150E - Manual (Page 16)

/Handset Settings / Handset Settings
5 Seiect the desired item. —>•
6 “Erase” ^ ill
7 “Yes” ® ^ [7^®]
Renaming a ringtone
1 IM (centre of joystick) f
2 “Ringer Setup” —> f*][€
3 “Cust. Ringtone” —>• Kin
4 “List” ^ 03
5 Select the desired item. —>• 151
6 “Rename” —>■ R13I
7 Edit the name (10 characters max.;
page 55). ® — ) ■ [*7i®|
Night mode
Night mode allows you to select a block of
time during which the handset will not ring
for outside calls. This feature is useful for
times when you do not want to be disturbed,
for example, while sleeping. Night mode can
be set independently for the handset and the
base unit (page 35).
Using the handset phonebook’s category
feature (page 20), you can also select
categories of callers whose calls will
override night mode and ring the handset
(Caller ID subscribers only).
Set the date and time beforehand (page 16).
Setting the start and end time for night
mode
1 HI (centre of joystick) —^ > 03
2 “Ringer Setup” —> Wa
3 “Night Mode” -4' S3
4 “Start/End” —> E3
5 Enter the desired hour and minute you
wish to start this feature.
6 Enter the desired hour and minute you
wish to end this feature.
7 Sa [‘9'*®]
Tyrning night mode on/off
1
2
3
4
5
(centre of joystick) —> | —> PIH
“Ringer Setup” —> KlK
“Night Mode” —> ISl
“On/Otf”
“On” or “Off” S3 [*9^®]
• When the night mode is set, ^ is
displayed.
Setting the ring delay for night mode
This setting allows the handset to ring during
night mode if the caller waits long enough.
After the selected amount of time passes,
the handset will ring. If you select “No
Ringing”, the handset will never ring
during night mode.
1 (centre of joystick) —> | S3
2 “Ringer Setup” —>•
3 “Night Mode” —> SI3
4 “Ring Delay” —>
m
5 Select the desired setting. —4 ^0 —>
Note:
• When the answering system answers the
call, this feature does not work.
Selecting categories to bypass night
mode
1 HI (centre of joystick) f —> ^0
2 “Ringer Setup" —>■ ISa
3 “Night Mode” —> 03
4 “Select Category” —> B!!l
5 Select the desired category numbers.
—^ BS —)■ 03
• Selected category numbers are
indicated by a ‘V".
• To cancel a selected category
number, select the number again,
then press Wi.
e
Display setup
Selecting wallpaper
You can select the “wallpaper" shown on the
display in standby mode.
1 tSl (centre of joystick) —> f —¥ ii!3
2 “Display Setup” —> PHI
3 “Wallpaper” —> 613
4 Push the joystick up or down to select
the desired picture.
• You can switch between the picture list
and the picture view by pressing IBl
or tai.
5
Note:
• If you select “Ho Picture”, the display
colour will be changed to the colour you
selected for display colour (page 31).
• The preset wallpaper patterns in this
product are used with permission of©
Digital Vision.
Selecting a display colour
1 ISi (centre of joystick) | —¥
2 “Display Setup” —¥ Wli
3 “Display Colour” —¥ Blti
4 Select the desired colour. —>
[Ti®]
Changing the display contrast
This feature is available for wallpaper and
display icons.
1 iSI (centre of joystick) —> # —¥
2 “Display Setup” —¥ MU
3 “Contrast ”—¥ Pin
4 Push the joystick up or down to select
the desired contrast. —> ii!!l —¥
Baby monitor (additional
handset required)
Using the baby monitor
This feature allows you to listen in on a room
where another handset is located, allowing
you to easily monitor from different areas of
the house. The monitored handset (placed
in a baby’s room, for example) will
automatically call the monitoring handset
when it detects sound.
Perform the following procedure with the
handset to be monitored (for example, the
handset placed in the baby's room).
1 ЯЙ1 (centre of joystick) —> f —¥ ИЭ
2 “Baby Monitor” —¥ год
3 “on/of f” ^ ВЭ
4 “Olì” —¥ МД
5 Seiect the desired handset number to
monitor with. —¥ ЯД
• “Baby Monitor” will be displayed.
Note:
® The monitoring handset will answer calls
automatically when the auto intercom
feature is set to “On” (page 33).
• The monitored handset cannot be used
while baby monitor is set to “on”. To
cancel monitoring;
—> “On/Off ” —> S3 ^ “Off”
Ea -> [7^®]
Bahy monitor sensitivity
You can adjust the sensitivity of the baby
monitor. Increase or decrease the sensitivity
to adjust the sound level needed to trigger
the baby monitor feature.
• This feature cannot be set during a
monitoring call.
1 Press
m
on the handset being
monitored.
2 “Sensitivity ”—¥ jgfa
30 Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333 Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333 31