Panasonic LUMIX DMW-FL360 - Manual (Page 50)

Specifications
Power requirements: DC 3.0 V
50
VQT1B10
Batteries
recommended for use
AA Alkaline dry batteries (LR6)x 2/
AA Rechargeable nickel metal hydride
batteries (Ni-MH)x 2
Charging time
(from full flash until the
[TEST/CHARGE]
button lights)
Approx. 8 s: AA Alkaline dry batteries
Approx. 7.5 s: AA Rechargeable nickel metal
hydride batteries
Firing period Approx. 1/20000 s to 1/500 s
(Varies depending on the flash intensity; FP
firing excluded.)
No. of flashes
(with full flash) Approx. 120 flashes: AA Alkaline dry batteries
Approx. 200 flashes: AA Rechargeable nickel
metal hydride batteries (2700 mAh type)
(Differs depending on the photo taking conditions.)
Flash modes TTL AUTO/AUTO/MANUAL/
FP TTL AUTO/FP MANUAL
Bounce angle Upward: 0 to 90 degrees,
downward: 0 to 7 degrees,
toward the right: 0 to 90 degrees,
toward the left: 0 to 180 degrees
Power-saving mode Coupled to power-saving mode of a digital
camera having communication capability
AF assist lamp Only for combinations with digital camera
having communication capability
approximate distance enabling automatic
lighting at low-brightness levels: 1 m
(3.28 feet) to 5 m (16.4 feet)
(Differs depending on the digital camera and
type of lens used)
Guide number Automatically selected
36: At 42 mm setting
(85 mm when a 135 camera is used)
20: At 12 mm setting
(24 mm when a 135 camera is used)
8/10 selected: When the wide panel is used