Panasonic LUMIX DMW-FL360 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
® The actual flash intensity may vary when the flash intensity adjustment
value has been set on both the digital camera and the unit.
® If [TTL AUTO], [AUTO] or [FP TTL AUTO] is selected, the unit fires
at the adjustment value obtained by adding together the adjustment
values set on the digital camera and the unit. (The value set on the
unit only is displayed as the flash intensity adjustment value.)
[Example]
Umt
Digital camera
Adjustment value setting
+0.3
+0.3
(+1/3 EV)
Unit’s flash Intensity
adjustment value display
+0.3
Actual adjustment value
+0.6
used for firing
(+2/3 EV)
® If [MANUAL] or [FP MANUAL] is selected, the unit fires at the
adjustment value set on the unit only.
[Example]
Adjustment value setting
Unit
+0.3
Digital camera
+0.3
(+1/3 EV)
Unit’s flash intensity
adjustment value display
+0.3
Actual adjustment value
+0.3
used for firing
(+1/3 EV)
27
VQT1B10