Adjusting the flash intensity – Panasonic LUMIX DMW-FL360 User Manual

Page 26

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

■ Adjusting the flash intensity

The flash intensity can be adjusted

in steps.
Set the flash intensity adjustment

to [ON] before adjusting the flash

intensity. (P40)

• [in ] appears on the display

panel.

1 Turn the select dial and

set the flash intensity
adjustment value.

(A):

Flash intensity adjustment

value

The flash intensity adjustment
value is always displayed except
when it is [0].
The flash working range
displayed is for when the flash

intensity adjustment value is [0].

® You cannot adjust the flash

intensity when the guide number
is at the highest or lowest value.

The flash intensity adjustment

range and the actual flash
Intensity may differ depending

on the flash mode.

® Flash intensity adjustment range

® If [TTL AUTO], [AUTO] or [FP

TTL AUTO] is selected, the

flash intensity can be

adjusted over a range of ±3.0

steps.

±0.3

±0.7-••±3.0

-0.3

-0.7--------- 3.0

If [MANUAL] or [FP MANUAL]

is selected, the flash intensity

can be adjusted over a range

of ±0.7 steps.

±0.3

±0.7

-0.3

-0.7

VQT1B10