Checking the flash’s remaining battery charge, 1 press the [power, Button – Panasonic LUMIX DMW-FL360 User Manual

Page 16: 2 check that the [test/ charge] button lights, I cud

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Checking the

Flash’s Remaining

Battery Charge

® Install the batteries and then

turn on the unit and check the

battery remaining power.

1 Press the [POWER]

button.

@ If it takes as long for the [TEST/

CHARGE] button to light as the
period indicated in the table
below, it means that the
batteries are nearly worn out.

Replace them with fresh

batteries as soon as possible.

Alkaline batteries

than 30 s

Rechargeable nickel

metal hydride

batteries

than 10 s

POWER

Q^O

® Charging now starts.

2 Check that the [TEST/

CHARGE] button lights.

® If the [TEST/CHARGE] button

and [AUTO CHECK] lamp both

flash at the same time, it means
that the batteries are almost

completely worn out and should
be replaced with fresh batteries

as soon as possible.

3 Press the [POWER]

button to turn off the

unit’s power.

m\.................

® When the [TEST/CHARGE]

(

1..

button is pressed, the unit may

mmmmm

fire.

liiiiilllllllli

® Turn off the power in the

TEST/CHARGE

following situations:

i CUD

® When mounting the unit onto.

or disengaging it from, the

. '

iililB

digital camera

® When you do not want the

unit to fire

@ When you are not going to

After the batteries have been

use the unit

fully charged, the [TEST/

CHARGE] button lights.

VQT1B10