Universal remote control is, The universal remote control setup, Using the universal remote control – Panasonic PV C2063 User Manual

Page 32: Üadie box universal kemote uontroi reature

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

üaDie BOX universal Kemote uontroi reature

Universal Remote Control Is...

The Remote Control may be set up to control some basic

DSS or Cable box tunctions.

The Universal Remote Control Setup

Find your DSS box or Cable box Brand Code
Number from one of the charts on the next
page.

Setup remote. Hold down DSS CABLE and
press number keys

to enter code.

• For code too or greater, first press 100 key, then the

remaining digits. E.g. for 102, press 100, then press 0, and

then press 2.

Confirm code entry.

Press POWER

to turn

selected unit ON or OFF.

• See below for oontroilable functions in each mode.

■

Please repeat the Universal Remote Control Setup after

replacing remote control batteries.

■

The remote control will not operate all DSS receivers or Cable

Boxes made by the manufactures listed. If you get no results,
your particular brand cannot be controlled.

Using the Universal Remote Control

Once the remote control has beers properly set up, you cars
select COMBO. DSS or CABLE mode depending on which

functions you wish to control. (See below.)

Press COMBO or DSS CABLE

on the remote control

to select the desired mode. (See below for buttons

available in each mode.)

Set to COMBO:

• All TV and VCR functions.

Set to DSS CABLE:

• Basso VCR functions, e.g. PLAY, REC, etc.
• CABLE/DSS functions, e.g. POWER, ENTER, number keys

(except too key), CH UP/DOWN.

POWER

COMBO

DSS/CABLE

-NUMBER Keys

-ENTER