Üopy your lapes (üudding), Connections you’ll need to make, Recording (editing) unit – Panasonic PV C2063 User Manual
Page 13: Seiect “line” mode, Press rec, then pause/slow, Press play, Press pause/slow, Press stop, Selecting input mode, Copy your tapes (dubbing)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
üopy Your lapes (üuDDing)
‘Important:
if a remote control button does not work when pressed, press the COMBO button on
the remote and try the button again.
Connections you’ll need to make.
Recording (Editing) unit
...... mmsmmmeamf:
Piaying (Source) VCR
* * * AUDIO VIDEO IN FROM ANT.f
e i
iiouT
On
I
IN
O
0—1
o
OUT TO TV
e
VIDEO l\ AUDIO l:M
Q
J
Playback (Source)
1
Recording (Editing) unit
M U ...... T /i
Insert
_________^
pre-recorded
li, ^^1
tape.
Í '''
Insert blank tape
with record tab.
• Dubbing tapes protected with
Copy Guard will have poor
quality results-
Seiect “LINE” mode.
See “Selecting Input Mode" below.
PAUSE
►
PU№
SLOW
r
-1
Press PLAY then
PAUSE at starting
point to put in
Standby mode.
PAUSE
Press REC, then
PAUSE/SLOW
immediately to put in
Standby mode.
(Perform operation of steps 4 and 5 on both units at same time.)
Press PLAY
to start dubbing.
PAUSE
Press PAUSE/SLOW
to start dubbing.
Press STOP
to stop dubbing.
STOP
Press STOP
to stop dubbing.
> Unauthorized exchanging
and/or copying of copyrighted
recordings may be copyright
infringement.
Selecting Input Mode
Method 1:
Press CH AY- The dispiay will change as follows.
►1-4-^2++-3^
LINE-*
(CABLE) (TV) J
—►I 25 or 69-*—^
Method
2
:
a Press ACTION for MAIN MENU,
b Press
to select “TV”, then press
ACTION for SET UP TV screen,
c Press AY to select “INPUT SELECT,” and then
press ►to select ‘TUNER” or “LINE”,
d Press ACTION twice to exit this mode.
13