Auto operation functions, Tape position display – Panasonic PV C2063 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
-TAPE
POSITION
Auto Operation Functions
■ Auto Shut Off
No broadcast signal
in TV (Only when
Weak Signal Display is set to OFF)
blank tape is Played for 5 rninutes '
Power turns off
• This feature is canceled if any button is
pressed during above mode.
a Auto Playback
Insert a tape in Power off mode
—* Power turns on
• Playback begins if tape has no record tab.
a Auto Rewind
Tape reaches its end
-*■ Rewind -*■ Stop
®
Auto Eject (Repeat Play
is “OFF”)
Tape with no record tab reaches its end
Rewind -+ Stop -+ Eject
Tape Position Display
To find
out
present tape position.
Tape position is displayed for VHS-C Cassettes
type^ tapes undar 30 minutes« and some other
tapes, but the position is not correct.
1
Press TAPE POSITION
to detect current tape
position.
F^TEcri^.-TAPE' poslirrm.'-
> “DETECTING TAPE
POSITION'' only appears the
first time a cassette is inserted
and ft takes several seconds
for coirect indication to appear.
• The present tape position
indication is displayed.
Press TAPE POSITION
{or wait 5 seconds)
to
return to the
normal screen.
25