Panasonic EP3203 - Manual (Page 21)

WHEN YOU WANT MORE CONTROL OVER INDIVIDUAL MASSAGE SETTINGS. (USER ADJUSTMENT FUNCTIONS)
Using the User Memory Buttons allow you to customize the back massage.
The more you use these functions the more you’ll customize it to provide just what it is you like.
.■ Programmed Operation and
I Self Program buttons
o User Memory
buttons--------
Massage Position
Adjustment button
2 Focus button
When you Want More Control over Individual Massage Settings
1. Select and start the program (Programmed Operation and Self Program) you desire
by following the procedures shown on Pages 11-18.
2. After the massage starts, adjust the program to your individual needs.
Spend more time on the location and type of massage you like with the focus button.
• During the program when the massage feels particularly good, press @ to concentrate on
that particular massage action.
> will flash and the unit will increase the amount of time spent on that particular type of massage.
> That particular kind of massage action will be repeated once more.
> The location and the type of massage will be recorded and the program will be changed to
emphasize this area and type of massage during the overall program.
> The focus function cannot be used in the Self Program.
> The focus function cannot be used when ft, |t or <=i' are displayed.
Press to increase
the time spent on
a particular location
and type of massage.
Fine Tuning Massage Location.
• Press this button to make minor adjustments to the location and lateral movement of the
massage heads during a program.
> will start flashing.
> The massage heads will move in accordance with the buttons you press.
> The location to which you have moved the massage heads will be recorded and the program
will be changed to move to this location whenever the program is selected.
> If you press the button and hear “peep-peep-peep”, this means that the massage heads
cannot be moved in the direction you have selected.
Press 'V;^ to fine tune
the massage location.
3. Recording the adjustments you have made.
(1) After the program has finished, or when you have pressed after the massage heads have moved
back to the retracted position » will start flashing after 20 seconds.
tf i
(2) Select and press the User Memory Button you want to record this program in. (Press one of the
buttons while * are flashing. They will flash for approximately 15 seconds.)
C
will flash and then the massage (3) The button you selected and pressed will then continue to flash,
will be completed.
Recording over existing programs.
• If you try and record over an existing program then the button you have pressed will flash quickly.
• Press the same button again to erase the existing information and record the new information.
• If you do not want to erase the information, select and press another of the User Memory Buttons.
> If you decide that you do not want to record the information, press B without pressing any of the User Program
buttons to cancel.
> While the information is being saved, none of the other buttons apart from the reclining and legrest button can be used.
19