Additional information, Display of massage areas, Pressure level display – Panasonic EP3203 User Manual
Page 15: Pressure feedback function, Programmed operation, Shiatsu program, Deep program, Gentle program, Refresh program
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Additional Information
Display of Massage Areas
Sometimes the massage areas displayed on the control panel will be different from what
you are actually experiencing.
* Due to limitations in the size of the display, the massage areas displayed on the control
panel are only a general indication of the area being massaged. This means that sometimes
the areas that are actually being massaged are different from those shown on the display.
Areas of massage displayed may change depending on changes to massage intensity or
position of massage heads.
Pressure Level Display
The pressure being applied to the body is shown on the display.
• The actual pressure experienced may vary from the level indicated on the display.
• Depending on the seatback fabric, the pressure level indicated may change even when nobody is sitting in the seat.
Pressure Feedback Function
The strength of the massage (pressure level) is automatically adjusted if it is too much or too little.
• The standard body pressure level varies according to the strength of the program selected.
Programmed Operation
• Please see Page 25 for details regard the lower body massage.
• The movements below are shown in simplified form for the sake of illustration.
Shiatsu Program
® Shia!
Shiat
'DTap
I) Shiatsi
Shiats
Tap A
D Shiatsu A.
D Knoat
Shiatsu R and
Knead..
(T) Knead
i
Tap B
(D Shiatsu B, Tap A ® Tap B,
and Knead B
and Roll
Deep Program
© Shiatsu A and
®
Swedist
Knead _
Knead B
Tap B
I I
©Knead A and ® Knoadf
Tap B
Shiati.
and Tap B
Gentle Program
©Knead Band
SwediE
®
Knead
Tap A
DKnead
©Swedist
and Ta,
©Knead A TapB
©TapB :
and Knead B
and Kn-
© Knead B Knead A © Knead -
and TapB
Swedis
Tap B
3)Swed
andT ,
Refresh Program
Roll and TapB
Tap A
Tap B and Roll
13