Panasonic EP3203 - Manual (Page 17)

WHEN YOU WANT TO CREATE YOUR OWN MASSAGE PROGRAM (SELF PROG.)
Movement Display -
• This displays the program
that is currently in use.
Pressure Level Display
• This dispiays the amount of
pressure exerted on the body.
Neck Roller Position
Button -
• Pressing this button allows
you to adjust the shoulder
positioh after body searchihg
has been carried out.
Display of Massage Areas —
• The massage points currently
being massaged flash.
Degree of Fatigue Display
•This is used in the Self Program to
ihdicate how tired you are ih each
area of your back and legs.
Program Strength Display
• This displays the strehgth of
the selected program.
Please ensure that the cover
is closed securely.
1. Press ( h \ .
• Programmed Operation buttons (four) and the Self Program buttons will start to flash.
2. Press .
• The Degree of Fatigue indicators on the display will all start to flash on the neck area.
• The massage heads will not start to move until you press i ok ].
• It is not possible to use the Self Program if the cover of the control panel is not completely closed.
3. Select the degree of Fatigue.
(1) Press to select the desired area of the body. The button will toggle down each time you press it.
-NECK
-SHOULDER
-BACK
- LOWER BACK
-LEGS
> The area of the body selected will start to flash.
(2) Press I.fatigó] to select the degree of fatigue.
The degree of fatigue will decrease as you continue to
press the button.
After reaching the minimum setting, if you press the
button again it will return to the maximum setting.
The greater your selection, the more time and movement
will be spent on that area. (See Page 18 for examples.)
(3) Press i OK ] after you have finished inputting settings for the various parts of the body.
The massage lounger will automatically create the massage program best suited to the information you have input.
Your selections will not be recorded until you have pressed [ o« ).
15