Panasonic Panafax UF-120 - Manual (Page 59)

PROBLEM SOLVING AND DAILY
CARE_________________________
information Codes
When something unusual occurs, the display may show one of the information codes
below. These will help you fix the problem.
Information
code
Meaning Action
010 No recording paper. Reload recording paper
(see page 61).
020 Thermal Recording Head Open the Receiving Unit for
temperature is too high. a few minutes to permit
cooling.
031 Document paper is too long Remove jammed document
or jammed. from the Document Feeder
Document length exceeds
39.4 inches (1 meter).
(see page 63).
060 Door is opened. Close the Receiving Unit.
400 During initial handshake, 1. Check with the other
receiving station did not party.
respond or communication 2. Reload the document
error occurred. and try again.
402 During initial handshake, Reload the document and try
404 communication failure again.
405 occurred.
403 No polling capability at the Ask other side to set
other side. “POLLED = ON”.
407 No confirmation from the Wait a few minutes and send
receiving station for the
previous page sent.
again.
408 Other side confirmation of Wait a few minutes and
409 previous page is illegible. transmit again.
411 Polling password does not Check polling password.
414 match.
8
59