Fax parameters – Panasonic Panafax UF-120 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FAX PARAMETERS
Your machine has a variety of adjustable Fax Parameters which control the follow
ing functions. These Fax Parameters are preset for you in standard settings (see
Fax Parameter Table on page 27). Usually you do not need to change the settings.
However, you may wish to change some of them to suit your own circumstances.
Once you reset the standard position, it will be effective until you change it again.
Some of the settings, such as Resolution or Contrast, can also be changed temporarily
by pressing the particular key.
Changing Fax Parameter Settings (Header Print Position,
Dialing Method, etc.)
4
Enter a Fax Parameter number (always
two digits) from the Parameter table.
Ex:
[T] for Resolution.
The number inside the brackets is the
standard setting and the number blinking
on the right corner is the current setting.
Enter the new setting.
Ex;
01
[1] 1
01
[
1
]
2
25