Making voice contact after sending/receiving, Answering a voice contact request – Panasonic Panafax UF-120 User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Making Voice Contact after Sending/Receiving
You may want to talk to the other person over the telephone after sending or receiv
ing documents. To do so, perform Step 1 while the machine is still sending or receiving.
1
LINE
ID DISPLAY
212 111 1 2 3 4
, the lamp lights up.
When sending or receiving is over and the other party replies with Voice Con
tact request, you will hear a beep-beep-beep sound coming through the
speaker.
When the TEL/DIAL lamp starts blinking, lift the handset.
4
The TEL7DIAL lamp goes off.
Talk.
Answering a Voice Contact Request
When you hear a beep-beep-beep sound coming through the speaker, it means you
are receiving a voice contact request. Reply by following the above procedure from
Step 3. If no one replies to the voice contact request, the message ‘'VOICE
CONTACT REQUESTED.” is printed out on the Transmission Journal (see page 53).
50