Panasonic Panafax UF-120 - Manual (Page 24)

Filling out the Station Directory Sheet
Use a pencil or a ball-point pen to fill in the station directory sheet with station names
corresponding to the Abbreviated number keys. The station directory sheet is held
in place in the machine by a transparent plastic cover sheet.
To remove the station directory sheet,
(1) Push the transparent plastic cover sheet to the left or right until it is bent enough
to take out.
(2) Remove the transparent plastic cover sheet together with the station directory
sheet.
Transparent Plastic Cover Sheet
Station Directory Sheet
To replace the sheets.
(1) Set the station directory sheet into its proper position.
(2) Place the transparent plastic cover sheet over the station directory sheet and
insert the projections provided bending the sheet. (See the figure below.)
NOT€
If you use a pen to fill in the station directory sheet, be sure the ink is dry. If you use
a pencil, remove any excess lead before replacing the station directory sheet.
24