Panasonic KX TC1503B - Manual (Page 47)

Before Requesting Help
Cordless Telephone
Problem Cause and Remedy
An alarm tone sounds when
you press O, ffl.
fHOLD/INTERCOMlor
[ FLASH/CALL WAIT/PLAYBACK1
•You are too far from the base unit.
Move closer and try again.
•Place the handset on the base unit and
try again.
•Plug in the AC adaptor.
• Raise the base unit antenna.
Static, sound cuts in/out,
fades. Interference from
other electrical units. •Locate the handset and the base unit
away from other electrical appliances
{p. 3).
• Move closer to the base unit.
• Raise the base unit antenna.
•Press CH 3) to select a clearer
channel in the talk, speakerphone,
intercom or remote operation mode.
The handset does not ring. •The ringer volume is set to OFF. Press
® or ® while the TALK indicator
light is off (p. 14).
You cannot store a phone
number in memory.
•You cannot store a number while the
unit is in the talk or intercom mode.
• Do not pause for over 60 seconds
while storing.
While storing a phone
number, the unit starts to
ring.
•To answer the call, press SI or Si •
The program will be canceled. Store
the number again.
(LOCATOR/INTERCOM) does
not function.
•The handset is too far from the base
unit or is engaged in an outside call.
f REDfAL/PAUSE/PROGRAM ]
does not function properly.
•The button has a triple function as
redial, pause or programming. It will
redial the last number dialed if pressed
at the outset of a call (p. 22). If another
number has been dialed first, it will
operate as a pause button (p. 27). If
pressed in the standby mode, the unit
will enter programming mode.
47