Panasonic KX TC1503B - Manual (Page 28)

Special Features
FLASH Button
Pressing WÁIT/PLAYBACK ] allows you to use special
features of your host PBX such as transferring an extension call or
accessing special telephone services (optional) such as call waiting.
Selecting the flash time
The flash time depends on your telephone exchange or host PBX.
You can select the following flash times: “90, 100, 110, 250, 300, 400,
600, 700 ms (milliseconds)”, using the handset near the base unit.
Your phone comes from the factory set to “700 ms”.
The TALK indicator light must be off before programming.
1 Press [REDIAL/PAUSePR^^M ]■
•The TALK indicator flashes.
Press a dialing button ((i] to [8)).
90 ms
110 ms
300 ms
600 ms
3
4 Press AUTO (B.
100 ms
250 ms
400 ms
700 ms
Press [FLASH^ALL WAIT/PLÁYBACK].
•A beep sounds.
TALK Indicator
AUTO®
i^DIAL/^USE/PROGRAMl
(FLASH/CALL WÀÌTT^ÀYBÀCK)
•If 3 beeps sound in step 4,
—a wrong key was pressed. Start again from step 1.
—the handset is too far from the base unit. Move closer to the base unit or place
the handset on the base unit. Start again from step 1.
• If you are connected via a PBX, a longer flash time may be necessary to use
PBX functions (transferring a call, etc.). Consult your PBX installer for the correct
setting.
28